When a projecting load extends to the rear four or more feet beyond the bed of the body of a vehicle in the daytime the extreme rear and sides of the load must be marked by four?
If you are driving with your high-beam lights on, you must dim them at least 500 ft from any oncoming vehicle, so you don’t blind the oncoming driver. You must use low-beam lights if you are within 200-300 ft of the vehicle you are following.
What is considered oversized load?
Red flags
Red flags 18″ square are required on rear corners on all loads exceeding legal width, height or length.
What is the color of the regulation flag attached to the rear of a load?
The Federal Motor Carrier Safety Regulations (FMCSRs) require any commercial motor vehicle (CMV) transporting a load that extends more than 4 feet beyond the rear of the vehicle to be marked with a single red or orange fluorescent warning flag at the extreme rear if the projecting load is 2 feet wide or less, and two …
Loads that extend beyond the ends of the hauling vehicle are called “overhangs.” The extremities of rear overhangs that extend more than 4 feet beyond the vehicle must be marked with flags (daytime) and red lights (night) (longer overhangs are legal in some states).
When projecting load extends to the rear four or more feet beyond the bed?
(1) On any vehicle having a load that extends more than four inches beyond its sides or more than four feet beyond its rear, there must be displayed red or orange fluorescent warning flags, not less than eighteen inches square, marking the extremities of such loads.
